RBOR-TS 6020 Tube Laser Cutting Machine (Manual Loading)
Three-chuck tube fiber laser cutting machine RBOR-TS
Have a question?
Fill out the form below and we’ll get back to you ASAP.
Specification
| Model | RBOR-TS 6020 |
|---|---|
| Diameter Of Round Tube | φ15mm-φ220mm φ0.591 inch-φ0.866inch |
| Effective Cutting Diameter Of Square Tube | 15*15mm-150*150mm 0.591*0.591 inch-5.906*5.906 inch |
| Positioning Accuracy | ±0.03mm ±0.0011811 inch |
| Repeat Positioning Accuracy | ±0.03mm ±0.0011811 inch |
| Maximum Simultaneous Positioning Speed | 100m/min 3937.008in/min |
| Laser Power | 1000w / 1500w / 2000w / 3000w / 4000w / 6000w |
| Max Acceleration | 1.0G |
| Input Power | 415V 3ph 50Hz |
| Operates On | Air, Nitrogen and Oxygen options. Requirement must be discussed before ordering. |
Innovative three-chuck design, stable clamping & stable cutting
One-key self-centering, fast clamping, rapid cutting; Three-point clamping to correct pipe bending, prevent inertial shaking and ensure cutting accuracy; The clamping force of the chuck can be adjusted according to the wall thickness of the pipe, which is convenient and efficient; The rear chuck brakes quickly to ensure pipe cutting accuracy.
Real zero Tailing
The diameter of round tube: 15mm-220mm The side length of square tube: 15mm-150mm High pipe load, the maximum single pipe weight is 300kg Clamping square tube, round tube, oval tube, flat tube, triangle tube, I-beam, and other materials without pressure
Double-sided follow-up support device
It can reduce processing errors, ensure uniform force on the entire metal pipe, and improve cutting accuracy. Real-time feeding to prevent the reduction of cutting accuracy due to pipe distortion.
Three-Chuck Tube Cutting System, intelligent control
Real-time compensation of pipe center deviation, reducing pipe clamping requirements and higher efficiency; The pipe has higher perforation accuracy and more accurate cutting. Based on the bus real-time system and integrated control, the pipe corner-cutting is faster; The corner following is more stable, and the cutting quality is more reliable.
3D tube nesting software TubesT, meet your production needs
TubesT is a 3D tube nesting software for the TS series. From parts drawing and modification, full type compensation, strategic nesting to report generation, using TubesT will meet and exceed your production needs.
Automatic Lubrication System
The number and time interval of automatic lubrication can be manually set according to the length of equipment use; Automatic lubrication for guide rails, sliders, gears, racks, etc., without manual lubrication; The waste lubricating oil can be recycled and treated centrally.
