Real zero Tailing | Three-chuck tube fiber laser cutting machine launch!

Real zero Tailing | Three-chuck tube fiber laser cutting machine launch!

 

Oree’s new TS series three-chuck laser pipe cutting machine, innovating the double-chuck clamping method, adopts a three-chuck design, which can maintain the front, middle, and rear three-point clamping support of the pipe in real-time and can correct the pipe bending problem. The relative cutting efficiency of some pipes is 5%-10% higher than that of the double chuck pipe cutting machine. The pipe cutting is true ‘zero tailing’, helping customers to achieve fast, high-quality, and low-cost production and processing.

 

Ingenious design

• Semi-enclosed visual protective cover

• Rocker type industrial computer

• Vertical lift door

• Operation warning light

 

 

Innovative three-chuck design, stable clamping & stable cutting

• One-key self-centering, fast clamping, rapid cutting

• Three-point clamping to correct pipe bending, prevent inertial shaking and ensure cutting accuracy

• The clamping force of the chuck can be adjusted according to the wall thickness of the pipe, which is convenient and efficient

• The rear chuck brakes quickly to ensure pipe cutting accuracy

 

Real zero Tailing

• The diameter of round tube: 15mm-220mm

• The side length of square tube: 15mm-150mm

• High pipe load, the maximum single pipe weight is 300kg

• Clamping square tube, round tube, oval tube, flat tube, triangle tube, I-beam, and other materials without pressure

 

 

FSCUT5000 Three-Chuck Tube Cutting System, intelligent control

• Real-time compensation of pipe center deviation, reducing pipe clamping requirements and higher efficiency;

• The pipe has higher perforation accuracy and more accurate cutting.

• Based on the bus real-time system and integrated control, the pipe corner-cutting is faster;

• The corner following is more stable, and the cutting quality is more reliable.

 

 

3D tube nesting software TubesT, meet your production needs

TubesT is a 3D tube nesting software for the TS series. From parts drawing and modification, full type compensation, strategic nesting to report generation, using TubesT will meet and exceed your production needs.

• Intelligent Nesting

• Flexible Common Line

• Quick Import

• Drawing Modification

• Nesting Report

 

 

Double-sided follow-up support device

• Double-sided support device

It can reduce processing errors, ensure uniform force on the entire metal pipe, and improve cutting accuracy.

• The chuck and support device are highly synchronized

Real-time feeding to prevent the reduction of cutting accuracy due to pipe distortion.

 

 

Automatic Lubrication System

• The number and time interval of automatic lubrication can be manually set according to the length of equipment use;

• Automatic lubrication for guide rails, sliders, gears, racks, etc., without manual lubrication;

• The waste lubricating oil can be recycled and treated centrally.

 

Technical Parameters

Model	TS6020
Diameter of round tube	φ15mm-φ220mm
Side length of square tube	15*15mm-150*150mm
maximum single pipe weight	300kgs
Pipe processing length	6m
X/Y axis positioning accuracy	±0.03mm
X/Y axis repeat positioning accuracy	±0.03mm
X/Y-axis Maximum Simultaneous Positioning Speed	100m/min
Maximum acceleration	1G
Input power	380V/50-60Hz
Laser Output Power	1000W/1500W/2000W/3000W/4000W/6000W